50mm diameter full color point light Waterproof led pixel module micky or transperant cover DC24V 1.5W

50mm diameter full color point light Waterproof led pixel module micky or transperant cover DC24V 1.5W
  • Продавецlevellawns.us
  • Список ценUS $35.00piece
  • Продажная ценаUS $35.00piece
  • ДоставкаБесплатная доставка
  • Рейтинги3,5 (212)

Oписание продукта

2M SK6812 MINI 3535 144led/m DC5V addressable RGB LED pixel strip 8mm Width PCB

 

DESCRIPTION

Kindly Note: This product is similar to the WS2812B protocol, and plenty of code is available for Arduino and other platforms. And can be controlled by WS2811/WS2812B DC5V controller.

Description :
LED light source: SK6812 MINI-3535 LED
Input voltage:.............DC5v;
Power:.......................34.56watt/mete,69.12watt/roll;
LED resource:.............SK6812 MINI-3535 led(3535 SMD RGB LED with built-in SK6812IC,similar with WS2811 IC)
Q\\\'ty of LED: ...............144leds/meter,144leds/roll, each LED is separately controlled
IC Type: .....................SK6812IC(built inside the 3535 smd rgb led)
Q\\\'ty of IC: ..................144IC/meter (1 IC drives 1 led chip);
Pixels:.........................144pixels/meter ; 288pixels/2meter
Pitch: .........................16.66mm(1000/60);
Grey scale: ..................256;
Bits/color: ...................8-bits/color;24bit for RGB
FPC size: ....................Width: 7-8mm, High: 2.5mm;
FPC color: ...................WHITE PCB
Protection rate..............NON-waterproof IP33/Tube waterproof IP67
Colors: ........................Full color RGB, dream color changing;
Cuttable:......................every LED is cuttable;
Package: ....................2meter/reel in anti-static bag;with 3M adhensive tape on the back

Package included:

2M SK6812 MINI 3535 144led/m DC5V addressable RGB LED pixel strip 8mm Width PCB IP20 non-waterproof

Product Decsription:
1) SK6812 WS2812B Strip is powered by a 5V power supply (not included) and is controlled by a single data line from a suitable controller (not included).
2) 3-pin JST connector included: Red:VCC, Blue:GND, Green:DATA.
3) The strip has 3M adhesive tape on the back. Installation surface must be smooth, clean and dry.
4) Strip can be cut between every LED to create custom lengths.
50 Do not bend strip sharply. Do not exceed 2 meters in a single circuit. Longer runs should be powered from both ends to reduce voltage drop.

Products Application:
SK6812 WS2812B dream color strips can be used for hotel, KTV, bar, game room and other leisure, entertainment decoration to heighten the atmosphere, car chassis, car decoration, shop decoration, home decoration and other decoration.2122123323232232323121221132322332322323233223322332323232322323232332232323232332232323323223