13/16/18/20 Inch Multifunction Tool Bag Large Capacity Thicken Professional Repair Tools Bag Messenger Toolkit Bag 1Pc

13/16/18/20 Inch Multifunction Tool Bag Large Capacity Thicken Professional Repair Tools Bag Messenger Toolkit Bag 1Pc
  • Продавецlevellawns.us
  • Список ценUS $20.89piece
  • Продажная ценаUS $20.89piece
  • ДоставкаБесплатная доставка
  • Рейтинги4,5 (332)

Oписание продукта

 

 

 

All the product you will receive: total 69 pieces

 

SU-046(1)

 

 

Tstep1Tstep2Tstep3Tstep4Tstep5Tstep6Tstep7Tstep8

 

How to use PDR paintless dent repair kits?
 
1. Clean the dent with a clean wet cloth (you can use the yellow line board to confirm the dent)
2. Mount the glue stick into the glue gun, pull the trigger to let the glue stick enter into the glue gun, connect the power source and preheat for 5 minutes
3. Use a proper drawing gasket. Large dent requires a large drawing gasket.
4. Pull the trigger and apply the drawing gasket with extruded glue
5. Fast place the drawing gasket with hot melt glue at the center of dent, press lightly until the glue cures and adheres (Let the glue cool for about 8 minutes. The cooling time should be less than 10 minutes and should be shorter slightly in winter)
6. Align the T-shaped repairer and press the drawing gasket with hot melt glue, pull the sliding rod backwards to pull up the dent
7. Check with a Line board. If dent still exists, knock it slightly with a flattening hammer or pen
8. Clean the repaired place with a clean wet cloth.

Note: If the above repair is not repaired successfully, please repeat the repair again

 

Big dent , please first use the T slide hammer to repair , when the T slide hammer repair later , will have the some small dent , this times you can try pulling bridge tool (good for less 9cm dent) ,if pulling bridge tool use later also have very very small dent , this time , you can try Glue Puller tool (good for less 3cm dent) (seen the picture)

-1

If the surface after repair has raised point, you can use the tap down pen and rubber hammer /ding hammer presses the bump:

AA 6

DSC_0936

we promise here :
 
 
free return & full refund 
 
if it wrong products , damage products , not received
 
we can write less value on parcel to help your paid less custom tax .
 Note:   Dear friend, If you choose DHL/TNT Commercial Express, It\'s free shipping,   But it doesn\'t include Customs tax     
 
In general, Buyers need pay the customs tax to clear Customs by yourself , Some Countries need pay it, Some Countries
 
not need to pay it, It\'s decided by customs policy of different  Countries. Seller can\'t control it. If you don\'t want to pay the
 
customs tax, please do not buy the prodouct, thank you

 

FAST-SHIPPING

 

Features:

----Dent Lifter for Baking-varnish-free dent repair, Paintless, fast, economy.
----Slide hammer is more powerful for Paintless Dent Repair, conquer big dent.
---- Bridge Puller, Glue Puller, Red small Puller fit for small dent
----Different Size tabs for dent lifter or Slide Hammer, For All Glue Pullers.
----PDR accessory metal & nylon Knock down Set, Different head for different dents.
----Specially formulated for superior pulling power on the toughest dent or Hail Damage.
----Dent Hammer is used by PDR technicians with punches to tap down high spots.

 

 

 

 

 

 

 

TB2cCLQaCzC11BjSszhXXbGVFXa_!!203159555021T_DSC3596

image

 

_DSC2146

 

BC

 

TT4

 

DSC_1794

 

 

 

 

 

 

 

5

AA

 

 

 

image